周東

海鄭實業(yè)上海有限公司

3M Scotchkote Electrical Coating 14853 / 3M 電氣絕緣防水漆

Scotchkote electrical coating is intended for use as an outer seal on plastic tape applications which are subjected to excessive

amounts of oil. It also improves the weather resistance and moisture resistance of the taped joint or splice. It is suitable for direct burial,

direct water immersion or above ground applications.

A fast drying sealant and bonding compound, the coating is provided in a brush top 16 oz. can for quick and easy application,

can containing 15 fl. oz. (0.44 L) of coating. Case quantity is 10 cans. Item Number: 14853

* Fast drying / Flexible when dry / self-contained applicator / No waste if container resealed after use. Adhesive to wood, metal, rubber and plastic.

* Compatible with PVC tape. use as an outer seal

* Dielectric Strength : Dry 450Volts/mil or 24hrs in H2O 200 volts/mil

* Scotchkote can be applied down to approximately 0° F since the flash point of the solvents is 0° F, but the solvents will

evaporate more slowly as the temperature decreases. It s operating high temperature is in the 176°F to 194° F ( 90°C) range.

特性: 1.耐候性良好并耐濕氣。2.防止水分滲透保護電機不生銹。3. 具彈性 4.快干, 在 22 度C 15分鐘后不黏手. 5. 工作溫度為 : 90度C( 190 度F) 閃點: 0°F/-18°C

用途: 1.電動機等之修護時, 作為漆面或絕緣防水之用。2.可增強絕緣能力。3. 室外電路接頭之防水絕緣保護. 4. 涂于電氣用膠帶（Vinyl Tape）之外層，可防水、防油、耐天候變化，加強保護效果。可用于直埋或浸于水中之電器、電纜接頭之防水保護處理。

絕緣效用：干后 450Volts/mil 或是 24hrs后在水中 200 volts/mil

絕緣防水漆 （Electrical Coating） － 特防水及外部漆面之保護

快干、持久保持其干燥性。防水、油脂、碳化氫及絕緣作用。 耐候性、耐濕性強。 干燥后，漆面具有彈性，不易受機械傷害。內(nèi)含涂刷。 使用后封罐，不造成浪費.

相對于 3M 1601 14853 耐候性更好 1601是透明 14853是暗褐色 1601用噴的 14853是用涂的