煤礦用阻燃風筒批發，礦用800風筒正負壓風筒價格

礦用正壓導風筒 負壓導風筒 軸流風機風筒 除塵風機風筒 隧道用通風帶 礦用風筒廠家

負壓導風筒的技術要求用途：用于煤礦、隧道、井下局部扇風機進行負壓通風。

軸流風機風筒通風性能測試報告風筒直徑，mm

百米風阻（N·S 2 /M 8 ）耐負壓性能：風筒進行耐負壓試驗時，其值應符合下表：

風筒直徑（mm） 鋼絲間距（mm） 耐負壓強度（pa)600 150 ≥3140600 100 ≥4900

除塵風機風筒直徑收縮率大于1%

隧道礦用通風帶具有抗靜電、阻然性。負壓風筒的生產執行標準：標準號: MT165-2007標淮；正壓導風筒，采用高溫高壓圓筒整體一次成型技術，縱向無接縫,具有阻燃、抗靜電、風阻力小、無漏風、強度高等優點，適用于煤礦井下。在巷道內應懸掛起來，做到平直、拉緊吊牢、逢環必掛、見壞必補、拐彎緩慢、排除積水，以利降低阻力礦用風筒廠家。

提出了紅外加熱膠接的思想，并對紅外加熱膠接技術作了簡單闡述。介紹了一種紅外加熱膠接礦用阻燃、防腐、橡塑風筒布的裝置。風筒通風性能測試報告 風筒直徑，mm 百米風阻（N·S 2 /M 8 ） 百米漏風率，% 300 ≤1728.0 ≤5.0 400 ≤410.0 ≤5.0 500 ≤134.0 ≤5.0 600 ≤54.0 ≤5.0 800 ≤13.0 ≤5.0 用途：用于煤礦、隧道、地鐵工程、船舶、井下局部進行抽出式導向通風礦用風筒廠家。50厘米礦用正壓負壓導風筒 阻燃耐磨抗折騰歡迎新老顧客朋友前來洽談惠顧！祝您每天好心情！

英文：

Fire-retardant, wear-resistant and anti-twisting of 50 cm mine positive pressure and negative pressure air duct

Mine positive pressure duct negative pressure duct axial flow fan duct dust removal fan duct tunnel ventilation belt mine duct manufacturer

Negative pressure air duct is used for negative pressure ventilation of local fans in coal mines, tunnels and underground mines.

Test Report on Ventilation Performance of Axial Fan Wind Tube Diameter, mm

Negative Pressure Resistance of 100-meter Wind Resistance (N.S 2/M 8): When the wind tube is tested under negative pressure, its value should conform to the following table:

Diameter of air duct (mm) steel wire spacing (mm) negative pressure strength (pa) 600 150 (> 3140 600 100 (> 4900)

The shrinkage rate of the diameter of the air cylinder of the dust removal fan is more than 1%.

The mine ventilation belt of the tunnel has the characteristics of antistatic and resistance. Standard No. MT165-2007 for production of negative pressure air duct; positive pressure air duct, using high temperature and high pressure cylinder integral one-time forming technology, longitudinal seamless, with flame retardant, antistatic, low wind resistance, no air leakage, high strength advantages, suitable for underground coal mine. In the roadway should be suspended, so as to make it straight, tighten the hanging, hang around, make up for bad, turn slowly, remove water, in order to reduce the resistance of mine ventilator manufacturers.

The idea of infrared heating bonding is put forward, and the technology of infrared heating bonding is briefly described. An infrared heating device for bonding flame retardant, anticorrosive and rubber-plastic duct cloth for mining is introduced. Testing report on ventilation performance of air duct: diameter of air duct, 100-meter air resistance (N.S 2/M 8), 100-meter air leakage rate,% 300 < 1728.0 < 5.0 400 < 410.0 < 5.0 500 < 134.0 < 5.0 600 < 54.0 < 5.0 800 < 13.0 < 5.0. Uses: Used in coal mine, tunnel, subway engineering, ship, underground local extraction-oriented ventilation mine air duct manufacturer. 50cm mine positive and negative pressure air duct flame retardant, wear-resistant and toss-resistant welcome old and new customers friends to come to negotiate patronage! Wish you a good mood every day!